hd C4

El hd C4 es un altavoz miniatura pasivo de 1 vía, equipado con cuatro controladores de banda ancha de 2″ con respuesta de frecuencia lineal.

The hd C4 is a passive 1-way miniature speaker, equipped with four 2″ broadband drivers with linear frequency response.

Descripción

El funcionamiento se puede realizar a través de cualquier amplificador de potencia sin DSP y convierte al hd C4 en la solución óptima para aplicaciones de sonido descentralizadas o pequeñas como restaurantes, salas de conferencias o teatros.

El hd C4 se puede fijar de forma flexible y sencilla o se puede utilizar de forma móvil. Usando el discreto soporte de pared con rótula, el hd C4 puede girarse e inclinarse fácilmente o montarse con el soporte de pared en ángulo en L extremadamente cerca y discreto de la superficie que se va a fijar. Las conexiones internas del bloque de terminales garantizan una conexión rápida y sin herramientas de los altavoces. Para una adaptación óptima a la arquitectura de la sala, el altavoz se puede personalizar en todos los colores RAL y longitudes especiales. Si el montaje en la pared no es posible, los altavoces se pueden usar con la placa base roscada opcional de 3/8″ y el conector SpeakCON en un soporte de micrófono.

Los subwoofers extremadamente potentes de la serie hd Sub o hd P con una capacidad de manejo de potencia AES de hasta 1800 W amplían la experiencia de sonido de baja frecuencia hasta el rango de infrasonido. La solución más elegante para ampliar el rango de graves de la serie C hd es el subwoofer de diseño súper delgado hd Slim265. Debido a su baja altura de tan solo 102 mm, cabe en cualquier techo suspendido, se puede montar en una pared o colocar de forma invisible debajo de un mueble.

Las aplicaciones en sistemas distribuidos existentes o desarrollados recientemente se pueden realizar con las versiones opcionales de 100 V. Los transformadores modernos garantizan un alto rendimiento de audio incluso a largas distancias y con secciones de cable pequeñas. Varias tomas de corriente permiten ajustar el nivel de sonido.

__

The operation can be done via any power amplifier without DSP and makes the hd C4 the optimal solution for decentralized or small sound applications such as restaurants, conference rooms or theaters. The hd C4 can be flexibly and easily fixed or can be used on a mobile basis. Using the discreet ball joint wall mount, the hd C4 can be easily swiveled and tilted or mounted with the L-angle wall mount extremely close and unobtrusive to the surface to be fixed. Internal terminal block connections ensure a tool-free and quick connection of the loudspeakers. For optimum adaptation to the room architecture, the loudspeaker can be customized in all RAL colors and special lengths. If wall mounting is not possible, the speakers can be used with the optional 3/8″ threaded base plate and SpeakCON jack on a microphone stand.

Extremely powerful subwoofers of the hd Sub- or hd P-Series with up to 1800 W AES power handling capacity extend the low-frequency sound experience down to the infrasound range. The most elegant solution for extending the bass range of the hd C-Series is the super slim hd Slim265 design subwoofer. Due to its low height of just 102 mm, it fits into any suspended ceiling, can be mounted on a wall or placed invisibly under a piece of furniture.

Applications in existing or newly developed distributed systems can be realized with the optional 100V versions. Modern transformers guarantee high audio performance even over long distances and with small cable cross-sections. Several power taps make it possible to adjust the sound level.

 

CommercialStick

  • passive 1-way PointSource Stick with 4x 2″
  • operation with any amplifier
  • frequency- and phase-optimized crossover
  • coverage 100° x 40°

  • precise & even sound radiation
  • Weight 4 kg
Model hd C4
Principle PointSource
Transducers 4x 2″ fullrange chassis
Crossover active at 120 Hz
Power handling capacity (RMS/Peak) 100 W / 140 W
Frequency range 120 Hz – 22 kHz
Sensitivity (1 W / 1 m) 91 dB
Max. sound pressure (1 m) 116 dB
Nominal dispersion angle horizontal 100° x vertical 40°
Nominal impedance 4 Ohms or 16 Ohms, chose on order
Connection 1x clamp connection inside
Dimensions (W x H x D) 80 x 545 x 78 mm
Weight 4 kg
Enclosure Powder-coated aluminium profile black
Steel grille with acoustic foam
Clamping terminal inside
cable inlet rear, incl. 2x M6 nuts
Options Speakon NL4
3/8“-thread + NL4
35 mm flange + NL4
RAL color
wall mount
special length
weather protection
100V transformer

Información adicional

Peso 1 kg
Dimensiones 100 × 30 cm

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “hd C4”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *