hd P12stereo

El hd P12stereo es un subwoofer de sistema activo compacto, fácil de transportar y potente.

The hd P12stereo is a compact, easy to carry and powerful active system subwoofer.

Descripción

El chasis de alta excursión de 12″ especialmente desarrollado con bobina de voz de 3″, un solo marco de goma y un sistema de imán de ferrita garantiza una disipación de calor óptima con una compresión de potencia mínima a través de la ventilación en el núcleo del polo.

El menor desarrollo de calor también significa mayor confiabilidad y menor estrés térmico en la bobina móvil. El resultado es una excelente dinámica y una reproducción de graves secos a una presión increíble. Toda la electrónica está integrada en la carcasa.

Todas las entradas y salidas relevantes están disponibles en un panel de conexión claramente dispuesto en la parte posterior.

En el sistema estéreo hd ML16/P12, actúa literalmente como una base. El hd P12stereo es el woofer optimizado para las series M y ML de hd. El rango de transmisión se amplía hacia abajo, y el headroom y la dinámica en el rango de graves del sistema aumentan notablemente de una manera muy eficiente y, al mismo tiempo, se descargan los altavoces de columna.

En la parte superior del hd P12stereo hay un inserto roscado M20 para un bastón de distancia, así como dos grandes asas de transporte para un fácil manejo. La carcasa está hecha de madera de abedul multiplexada y recubierta con una pintura texturizada resistente a golpes y arañazos. La parte frontal del altavoz está protegida por una rejilla metálica recubierta de espuma acústica. Cuatro pies de goma resistentes a la abrasión en la parte inferior garantizan una base segura.

__

The specially developed 12″ high excursion chassis with 3″ voice coil, single rubber surround and ferrite magnet system guarantees optimal heat dissipation with minimal power compression through ventilation at the pole core. The lower heat development also means increased reliability and reduced thermal stress on the voice coil. Excellent dynamics and dry bass reproduction at incredible pressure is the result. The entire electronics is integrated in the housing. All relevant inputs and outputs are available on a clearly arranged connection panel on the back.

In the hd ML16/P12stereo system it literally acts as a base. The hd P12stereo is the optimally tuned woofer for the hd M-Series and ML-Series. The transmission range is extended downwards, and the headroom and dynamics in the bass range of the system are noticeably increased in a very efficient manner and, at the same time, the column loudspeakers are relieved.

On top of the hd P12stereo is an M20 threaded insert for a distance pole as well as two generous transport handles for easy handling. The housing is made of multiplex birch wood and coated with a shock- and scratch-resistant textured paint. The front of the speaker is protected by a metal grille covered with acoustic foam. Four abrasion-resistant rubber feet on the underside ensure a secure footing.

Active System Subwoofer

  • 1x 12“ long excursion loudspeaker 400 W / 800 W
  • frequency range from 40 Hz
  • 3-way Class D power amplifier (3x 500 W)
  • High-End-DSP with FIR filter
  • ultra compact dimensions
  • subwoofer extension to match the hd M-/ML-Series
  • installation version without handles / M20 thread available

  • software hd LevelZ

    Model hd P12stereo
    Principle bass reflex system
    Transducers 1x 12″ high excursion chassis
    Crossover active up to max. 180 Hz
    Power handling capacity (RMS/Peak) 400 W / 800 W
    Frequency range 40 Hz – 180 Hz
    Sensitivity (1 W / 1 m) 98 dB
    Max. sound pressure (1 m) 122 dB
    Power @ 4 Ohms 3x 500 W
    DSP hd MultiDSP 2In 3Out with FIR / IIR filter
    multistage limiter architecture
    hd LevelZ remote software
    LED meter and USB
    Connection 2x XLR input
    1x NL4 output TOP L (2-pole)
    1x NL4 output TOP R & SUB (4-pole)
    1x IEC mains input
    Dimensions (W x H x D) 400 x 430 x 420 mm
    Weight 19 kg
    Enclosure 15 mm multiplex birch wood
    textured paint black
    Acoustic foam
    ergonomic transport handles
    M20 thread insert
    Options Transport Protection Cover
    installation version
    RAL color

Información adicional

Peso 1 kg
Dimensiones 100 × 30 cm

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “hd P12stereo”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *